顯微鏡環境控制箱，用于控制顯微鏡觀察臺的溫度、濕度、氣體濃度保持恒定的狀態，以進行長時間動態細胞觀察。

我們可以為各種品牌的顯微鏡定制專業的顯微鏡環境控制系統。詳情請來電咨詢。

Complete systems include

? Microscope enclosure

? Stage top climate chamber

? Temperature controller with air heater

? Gas controller (CO2， O2， or dual CO2/O2)

? Humidity module ? Touch screen interface

? Smart box (optional)

? Obscuring panels (optional)

? Filter box (optional)

Bold Line Microscope Enclosure

A controlled environment all around the microscope.

The CO2 Microscope Cage Incubator is designed to maintain the required environmental conditions for cell culture around your microscopy workstation， enabling prolonged observations on biological specimens and allowing space for other equipment.

Cells cultured within the microscope cage incubator have been shown to proliferate as well as in a regular bench-top incubator.

Models for any inverted and upright microscope are available. A wide choice of chambers and interchangeable plate adapters allow the use of any cell culture support (petri， glass slides， multiwell plates， and others). Compatible with manual and digital CO2 / O2 gas controllers.

Easy 'turn-to-open' assembly

'Turn-to-open' hinges permit direct removal of both the front and upper panel. Once these panels have been removed， the rest of the cage incubator can be easily moved backwards. When needed， the cage incubator can be reassembled in five minutes.

Full accessibility

Several doors on the front and side panels allow full and easy access to the microscope. In particular， two openings on the bottom of the front panel provide unrestricted access to the focus knob.

Additional doors can be added upon request.

Obscuring Panels

Obscuring panels can be assembled with the cage by means of turn to open hinges to create a darkeded environment for fluorescence experiments.

Temperature Controller - H201 T UNIT BL

The H201 T UNIT BL is the temperature controller used with the cage incubator， it includes the air heater， and requires the Oko-Touch for operation.

The controller keeps the specimen at the desired temperature by maintaining the temperature of the air blown into the enclosure. A filter box can be attached to the air heater to guarantee that the recycled air is dust and bacteria free. Temperature precision is 0.1°C from 3°C above ambient to 40°C.

The air heater has a double inlet and outlet to recycle the heated air. Flow rate and temperature sensors are continuously monitored and allow fast start- up and stable gradient free operation during the experiment. Air flow rate and temperature are set using the OKOTouch.

Specimen / Cage

Temperature feedback operation There are two ways to operate the system depending on which temperature sensor is used to provide feedback to the H201 - T UNIT BL.

In the specimen feedback mode， feedback is provided by a sensor placed inside the climate chamber near the specimen. Simple manipulation is required to attach the thermocouple into the reference well with adhesive tape.

In the enclosure feedback mode the sensor is measuring the temperature of the air inside the enclosure.

請關注玉研儀器的更多相關產品。

如對產品細節和價格感興趣，敬請來電咨詢！